Bien, pour commencer, sous Android, paramètres, applications. En bas ce la fenêtre, un curseur t'indique la taille de ton stockage, xxxMo utilisés, et donc XXXMo libres. La somme des deux te donne la taille totale bien sûr. Donc 2Go de stockage ou 4Go de stockage interne.
http://www.ondaforum.com/files/file/47- ... romLogin=1Pour les instructions, elles sont dans le zip contenant la rom. En voici une copie:
Installation instructions
-----------------------------
Case A - Upgrade install
-------------------------------
If your tablet has already 2GB /data partition (meaning your are already running one of my 2GB roms, or an official one), then follow this procedure for the upgrade:
Follow this steps exactly:
1- Extract the .rar file of the ROM. You will get these files:
aml_autoscript
factory_update_param.aml
recovery.img
u-boot.bin
update.zip
2- Put an SD card of size up to 16GB in card reader.
3- Format the SD card with SDFormatter version 4 (hint: run this program as administrator).
You can download it from here:
http://www.ondaforum.com/topic/148-sd-f ... dsdhcsdxc/4- From the files you extracted in step 1 copy ONLY these files to SD card:
factory_update_param.aml
update.zip
5- Safely remove the SD card from the computer (Very important!).
6- Power off the tablet by pressing <Power> button for 20 seconds.
7- Put the SD card into the tablet's card slot.
8- Press simultaneously AND HOLD the buttons <Power> and <Volume +>.
9- When the green droid appears (or after about 5 seconds if no droid appears) release ONLY <Power> button. Keep pressing <Volume+>.
10- After about 1-3 minutes you will see the big droid with the spinning cube. Now release the <Volume+> button.
11- When the update finishes, the tablet will reboot. As soon as you see the ONDA logo, you are in business.
Case B - Clean install
----------------------------
If your tablet has 4GB /data partition (meaning your are running one of my 4GB roms), then follow this procedure for the upgrade:
Follow this steps exactly:
1- Extract the .rar file of the ROM. You will get these files:
aml_autoscript
factory_update_param.aml
recovery.img
u-boot.bin
update.zip
2- Put an SD card of size up to 16GB in card reader.
3- Format the SD card with SDFormatter version 4 (hint: run this program as administrator).
You can download it from here:
http://www.ondaforum.com/topic/148-sd-f ... dsdhcsdxc/4- Make the SD card bootable with SDcardMaker_uboot tool.
You can download it from here:
http://www.ondaforum.com/topic/29-sd-card-maker/ IMPORTANT: Select the u-boot.bin from the ROM you extracted in step 1.
Format the card when asked to by the SDcardMaker_uboot. Format must be FAT32 with 32KB cluster size.
5- Copy all the files you extracted in step 1 to SD card.
6- Safely remove the SD card from the computer (Very important!).
7- Power off the tablet by pressing <Power> button for 20 seconds.
8- Put the SD card into the tablet's card slot.
9- Press simultaneously AND HOLD the buttons <Power> and <Volume +>.
10- When the green droid appears (or after about 5 seconds if no droid appears) release ONLY <Power> button. Keep pressing <Volume+>.
11- After about 1-3 minutes you will see the big droid with the spinning cube. Now release the <Volume+> button.
12- When the update finishes, the tablet will reboot. As soon as you see the ONDA logo, you are in business.
Tiens nous au courant, et n'hésite pas à bous solliciter, mais je pense que ça va bien se passer!
