par npoupine »
dim. 22 janv. 2017 16:01
J'espère que mon tuto sera compréhensible!
Info préliminaire: pour cette opération, on utilisera un PC, sur lequel on installera un logiciel nommé "adb" et qui permettra de contrôler la tablette.
Instructions:
1- Install the Intel ADB drivers (IntelAndroidDrvSetup1.10.0.exe) on your PC and enable USB debugging
in developper options of the tablet.
Installez les pilotes Intel ADB (IntelAndroidDrvSetup1.10.0.exe) sur votre PC et activez le débogage USB
dans les options développeur de la tablette sous android.
2- Plug the tablet on your PC, with Android running.
Branchez la tablette sur votre PC, avec Android en cours d'exécution.
3- Copy SuperSU-v2.78-201609011115.zip on your tablet (internal storage or SD Card, as you wish).
Copiez SuperSU-v2.78-201609011115.zip sur votre tablette (stockage interne ou carte SD, comme vous le souhaitez).
4- Open a command prompt in the same directory where this folder is, then type:
Ouvrez une invite de commande dans le même répertoire mode administrateur où ce dossier est, puis tapez:
________________________________________________________________________________
adb reboot bootloader
________________________________________________________________________________
4a - If not working, type
________________________________________________________________________________
adb disable-verity
________________________________________________________________________________
- Then reboot the tablet and start again to 4.
- Puis redémarrez la tablette et recommencez à 4.
5- The tablet will now reboot in bootloader, please wait then type:
La tablette va maintenant redémarrer dans bootloader, veuillez patienter puis tapez:
these commands are optional, they make a copy of the recovery & boot image in case you want to restore them later
Ces commandes sont facultatives, elles font une copie de l'image de récupération & d'amorçage au cas où vous voulez les restaurer plus tard
________________________________________________________________________________
adb root
adb remount
adb shell mkdir /data/local/dump
adb shell dd if=/dev/block/mmcblk0p4 of=/data/local/dump/dumprecovery.img
adb shell dd if=/dev/block/mmcblk0p3 of=/data/local/dump/dumpboot.img
adb pull /data/local/dump/dumpboot.img
adb pull /data/local/dump/dumprecovery.img
________________________________________________________________________________
These commands will flash a custom bootloader and recovery (TWRP):
Ces commandes installeront un lanceur de démarrage et une récupération personnalisés (TWRP):
________________________________________________________________________________
fastboot flash boot boot.img
fastboot boot loader.efi
fastboot flash recovery TWRP-2.8.7.0_teclast_x98pro-b2.img
________________________________________________________________________________
5a- If not working, you can also boot manually in DNX mode:
Power off the tablet, then press the three buttons until you see the screen on
Then start again to 5
Si vça ne fonctionne pas, vous pouvez également démarrer manuellement en mode DNX:
Éteignez la tablette, puis appuyez sur les trois boutons jusqu'à ce que l'écran s'allume.
Puis recommencez à 5
6- Now, choose to reboot in recovery (navigate with volume + & - and confirm with power)
6- Maintenant, choisissez de redémarrer en récupération (naviguez avec le volume + & - et confirmez avec la puissance)
6a- Alternatively, you can type
6a- Sinon, vous pouvez taper
________________________________________________________________________________
fastboot reboot
________________________________________________________________________________
- The tablet will reboot again....
- La tablette redémarre à nouveau ...
- Wait for Android to boot, then type:
- Attendez que Android démarre, puis tapez:
________________________________________________________________________________
adb reboot recovery
________________________________________________________________________________
7- Now, the tablet will boot on TWRP (recovery), you will need an USB mouse as the touch screen is not working.
Maintenant, la tablette démarrera sur TWRP (récupération), vous aurez besoin d'une souris USB car l'écran tactile ne fonctionne pas.
- Optional, but recommended: make a backup of your system with TWRP.
- Facultatif, mais recommandé: faire une sauvegarde de votre système avec TWRP.
- Choose install, then flash SuperSU-v2.79-201612051815
- Choisissez installation, puis flash SuperSU-v2.79-201612051815
- Once done, choose reboot, system
- Une fois terminé, choisissez reboot, system
[/align]
You can disable USB debugging now.
You can install Quick Reboot (Root) by PhongIT on the PlayStore to quick access to recovery, or use the command "adb reboot recovery".
If you want to update SuperSU, you must flash it from TWRP again.
If you want to restore original boot and/or recovery images, type these commands:
Vous pouvez désactiver le débogage USB maintenant.
Vous pouvez installer Quick Reboot (Root) par PhongIT sur le PlayStore pour accéder rapidement à la récupération, ou utiliser la commande "redémarrage adb reboot".
Si vous souhaitez mettre à jour SuperSU, vous devez le clignoter à nouveau à partir de TWRP.
Si vous voulez restaurer des images d'amorçage et / ou de récupération d'origine, tapez ces commandes
________________________________________________________________________________
adb reboot fastboot
fastboot flash boot dumpboot.img
fastboot flash dumprecovery.img
________________________________________________________________________________
Je suis CHARLIE.