Dernier message de la page précédente :
Où peut-on trouver cette ROM custom svp ? 4 Go pour les applis c'est plutôt intéressant
Firmware v2.0 V3(Beta) test
Publicités
Salut,
V3 http://pan.baidu.com/s/1jG7PDyu mdp：e88x
V4 http://pan.baidu.com/s/1sjpu41Z mdp：joj7
V2 http://pan.baidu.com/s/1o65FFjO mdp：ne2d
V3 http://pan.baidu.com/s/1jG7PDyu mdp：e88x
V4 http://pan.baidu.com/s/1sjpu41Z mdp：joj7
V2 http://pan.baidu.com/s/1o65FFjO mdp：ne2d
J'ai compris que pour flasher un fichier au format .img, il fallait utiliser "OndaSuite".
J'ai trouvé le fichier d'install de cette suite avec son magnifique tutorial en Chinois ici :
http://pan.baidu.com/s/1jGHYmii
Néanmoins le .doc en Chinois c'est hard
Ca existerait pas en Anglais par hasard ?
J'ai trouvé le fichier d'install de cette suite avec son magnifique tutorial en Chinois ici :
http://pan.baidu.com/s/1jGHYmii
Néanmoins le .doc en Chinois c'est hard
Ca existerait pas en Anglais par hasard ?
Bonjour,
J'ai trouvé un mode d'emploi en anglais que je remets ici :
V989 Brush ENG Tutorial.docx
【必看】刷机教程_.doc
[Must See] Brush tutorial _.doc English Google Translation
IMPORTANT:
1, please read carefully the end of this tutorial, read again after the operation ! ! !
2, strictly in accordance with the method of operation of this tutorial, prohibit modification steps on their own ! ! !
Brush preparation:
1, please use WinXP, Win7 desktop computer system, the USB cable connected to the desktop computer rear USB port.
2, to ensure that the tablet in more than 50% of electricity.
3, turn off anti-virus software on your computer (some antivirus software may upgrade tool virus false positives).
4, make a backup before upgrading the Tablet PC and storing useful data if the machine is inserted TF card, please pull out the TF card.
5, please read the instructions carefully before upgrading, there is a risk Brush, improper operation can not use the tablet, you need to purchase Office Depot contact for maintenance treatment.
Brush steps:
1, after extracting the downloaded firmware package has three documents, namely the Brush tool, firmware and Brush tutorial, as shown below:
Tips: firmware package name on the map only for demonstration, the actual name to your unzipped prevail.
2, the installation Brush tool:
Double-click the file to install the interface as shown below:
When the pop-up window on the map to complete the installation, after clicking the Finish button, then install the driver automatically pop up the window shown in the following figure
In the driver installation process, if there are pop-up warning system security, be sure to click to accept, otherwise it will prevent the driver installation; If there is no security warning pop-up system, ignore this step and continue to the next step.
Driver is installed, as shown in the following figure.
After the installation is complete, it will generate a shortcut icon on the desktop.
3, run the Brush tool, load the firmware:
3.1, double-click the icon on the desktop or the Start menu, click on the corresponding shortcut to run 'Onda tablet helper' software, the software running interface is shown below. If you have a small window pops up a software update, please close the small window.
3.2, click a button above the [Brush], as shown below, and then select the firmware package. -> Please select the firmware according to the below steps:
4, Tablet PC first off, start flashing the firmware:
4.1, the first tablet computer shutdown. If you are not sure whether the tablet PC is turned off, you can press the power button for 10-20 seconds to force shutdown.
Special note: If your tablet computer, shut down the "next fast boot" option, and is turned on, please turn off this feature before shutting down (remove the tick), otherwise inaccessible brush mode on the menu.
4.2, allowing the Tablet PC into the brush mode. Steps are: the Home key (if not the Home key on your plate, please find the volume down key) and hold the Do not let go, plug in the USB cable, and then press the power button 5-10 consecutive times until the computer prompts the lower right corner found new hardware and install the driver window pops up, and then release the Home button (or the volume down key), the following chart shows the correct installation of the driver:
Tip:
1 will automatically pop up a window several times found new hardware on your computer, according to the diagram to complete the driver is automatically installed;
2 If the driver can not be installed automatically, as according to the chart, you can manually update the tool path to the driver file folder under the installation directory. The default path is: C: \ Program Files \ OndaSuite \ Drivers \ AW_Driver folder;
3 the same computer only the first brush firmware will require the installation of the driver, the second after brush firmware directly following window pops up!
4.3, after driving Bahrain, will directly start flashing the firmware, operating according to the following figure shows the sequence:
At this point, the upgrade is complete. Turn off the upgrade tool, disconnect the USB cable, if the tablet does not automatically turn on, press the power button to manually boot. First boot after the upgrade will be completed in time a little longer, please be patient for a while.
Note:
1 If the upgrade fails, unplug the USB cable, and then press the power button for about 20 seconds for the tablet computer forced shutdown again from step 4 to re-start tutorial Brush;
J'ai trouvé un mode d'emploi en anglais que je remets ici :
V989 Brush ENG Tutorial.docx
【必看】刷机教程_.doc
[Must See] Brush tutorial _.doc English Google Translation
IMPORTANT:
1, please read carefully the end of this tutorial, read again after the operation ! ! !
2, strictly in accordance with the method of operation of this tutorial, prohibit modification steps on their own ! ! !
Brush preparation:
1, please use WinXP, Win7 desktop computer system, the USB cable connected to the desktop computer rear USB port.
2, to ensure that the tablet in more than 50% of electricity.
3, turn off anti-virus software on your computer (some antivirus software may upgrade tool virus false positives).
4, make a backup before upgrading the Tablet PC and storing useful data if the machine is inserted TF card, please pull out the TF card.
5, please read the instructions carefully before upgrading, there is a risk Brush, improper operation can not use the tablet, you need to purchase Office Depot contact for maintenance treatment.
Brush steps:
1, after extracting the downloaded firmware package has three documents, namely the Brush tool, firmware and Brush tutorial, as shown below:
Tips: firmware package name on the map only for demonstration, the actual name to your unzipped prevail.
2, the installation Brush tool:
Double-click the file to install the interface as shown below:
When the pop-up window on the map to complete the installation, after clicking the Finish button, then install the driver automatically pop up the window shown in the following figure
In the driver installation process, if there are pop-up warning system security, be sure to click to accept, otherwise it will prevent the driver installation; If there is no security warning pop-up system, ignore this step and continue to the next step.
Driver is installed, as shown in the following figure.
After the installation is complete, it will generate a shortcut icon on the desktop.
3, run the Brush tool, load the firmware:
3.1, double-click the icon on the desktop or the Start menu, click on the corresponding shortcut to run 'Onda tablet helper' software, the software running interface is shown below. If you have a small window pops up a software update, please close the small window.
3.2, click a button above the [Brush], as shown below, and then select the firmware package. -> Please select the firmware according to the below steps:
4, Tablet PC first off, start flashing the firmware:
4.1, the first tablet computer shutdown. If you are not sure whether the tablet PC is turned off, you can press the power button for 10-20 seconds to force shutdown.
Special note: If your tablet computer, shut down the "next fast boot" option, and is turned on, please turn off this feature before shutting down (remove the tick), otherwise inaccessible brush mode on the menu.
4.2, allowing the Tablet PC into the brush mode. Steps are: the Home key (if not the Home key on your plate, please find the volume down key) and hold the Do not let go, plug in the USB cable, and then press the power button 5-10 consecutive times until the computer prompts the lower right corner found new hardware and install the driver window pops up, and then release the Home button (or the volume down key), the following chart shows the correct installation of the driver:
Tip:
1 will automatically pop up a window several times found new hardware on your computer, according to the diagram to complete the driver is automatically installed;
2 If the driver can not be installed automatically, as according to the chart, you can manually update the tool path to the driver file folder under the installation directory. The default path is: C: \ Program Files \ OndaSuite \ Drivers \ AW_Driver folder;
3 the same computer only the first brush firmware will require the installation of the driver, the second after brush firmware directly following window pops up!
4.3, after driving Bahrain, will directly start flashing the firmware, operating according to the following figure shows the sequence:
At this point, the upgrade is complete. Turn off the upgrade tool, disconnect the USB cable, if the tablet does not automatically turn on, press the power button to manually boot. First boot after the upgrade will be completed in time a little longer, please be patient for a while.
Note:
1 If the upgrade fails, unplug the USB cable, and then press the power button for about 20 seconds for the tablet computer forced shutdown again from step 4 to re-start tutorial Brush;
Bonjour,
voici les liens de la nouvelle version réalisée à partir de la version officielle 2.0 et non béta.
V3:：http://pan.baidu.com/s/1o6iFiAI mdp：9bag
V1:：http://pan.baidu.com/s/1dD6Ee6P mdp：m4yp
V2:：http://pan.baidu.com/s/1kTIDegZ mdp：lp8z
V4:：http://pan.baidu.com/s/1bCcSe mdp：arjl
je ne l'ai pas encore installée.
je vous mets également le lien vers la traduction du fichier d'Onda Suite que j'ai réalisée à partir de google trad.
http://dl.free.fr/kAWCGuSQ5
voici les liens de la nouvelle version réalisée à partir de la version officielle 2.0 et non béta.
V3:：http://pan.baidu.com/s/1o6iFiAI mdp：9bag
V1:：http://pan.baidu.com/s/1dD6Ee6P mdp：m4yp
V2:：http://pan.baidu.com/s/1kTIDegZ mdp：lp8z
V4:：http://pan.baidu.com/s/1bCcSe mdp：arjl
je ne l'ai pas encore installée.
je vous mets également le lien vers la traduction du fichier d'Onda Suite que j'ai réalisée à partir de google trad.
http://dl.free.fr/kAWCGuSQ5
-
marhvel
- Membres
- Messages : 50
- Enregistré le : dim. 26 janv. 2014 15:03
- Localisation : rennes
- Statut : Hors ligne
bonjour à tous,
nouveau possesseur d'une v989 en v1, j'aimerais avoir des retour sur la v2.0 v4 officielle....
avant d'installer trop de choses dessus et d'etre obliger de tout recommencer.
merci d'avance
marhvel
nouveau possesseur d'une v989 en v1, j'aimerais avoir des retour sur la v2.0 v4 officielle....
avant d'installer trop de choses dessus et d'etre obliger de tout recommencer.
merci d'avance
marhvel
-
marhvel
- Membres
- Messages : 50
- Enregistré le : dim. 26 janv. 2014 15:03
- Localisation : rennes
- Statut : Hors ligne
en fait je voulais dire v1.0.3 v4, je ssais que je suis en v4 mais il y a v2.0 v4 maintenant en officiel
-
florian83260
- Membres
- Messages : 47
- Enregistré le : ven. 9 août 2013 09:32
- Statut : Hors ligne
Je vous conseille de continuer la discussion dans qui n'est plus une beta.
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invité
Nous sommes le mar. 10 juin 2025 08:48